How can you be a home plumber?

 

Are you one of those people who always calls a plumber for the simplest tasks, such as a clogged sink or toilet? If you are, you can easily remedy these problems yourself and save yourself a lot of money in the process. All you need is a bit of knowledge and a few simple tools.

Tools A Home Plumber Will Need

Every home plumber needs a few tools that will take care of many of the common problems you will experience. First, and most important, you will need a good quality plunger. These come in a variety of different sizes, but if you only purchase one, go for the best quality toilet that can be used to plunge out sinks and toilets. Another item to have in your home plumbing toolbox will be a plumbing snake. These snakes can be used to loosen up any clogs in a toilet, sink, bathtub or sewer line, and work wonderfully for items that a plunger may not be able to loosen. You should also have some plumber’s putty and sealant in your toolkit. These can be used for leaks that may occur in your pipes. Lastly, you will need a large adjustable wrench. The wrench can be used to tighten any fittings that may come loose and cause a leak under your sink. 

If you want to be a skilled plumber you should know about Garbage disposal leaking

How to Use Your Tools Properly If Your A Home Plumber

Having the correct tools won’t do you any good unless you know how to use them and what they should be used for. Let’s take the time to explain the best way to use each of the above tools.

PLUNGER- To use this properly, you will place the plunger over the drain hole in your sink, toilet or bathtub. Plungers work by suction, so you will want to make sure you have a good seal around the drain in order for the best results. To get a good seal, your plunger should be covered with water. It is okay to add more water if there isn’t enough. When you press down, you will feel some pressure, and then when the plunger moves back up, this gives the suctioning effect you need to unclog your pipe.

PLUMBING SNAKE- Plumbing snakes work best for larger clogs that the plunger cannot fix. To use the plumbing snake, you will begin working one end into the tub, toilet or sink drain. Because of its flexibility, it will easily work through the twists and turns of your pipes until you reach the clog. Once you can’t push the snake any further, begin to push and twist the snake until you poke through whatever is causing your pipes to clog. This should allow the water to drain out of your clogged fixture. Once you have the clog worked loose, you can then either use a plunger or hot water to clean the rest of the gunk out.

SEALANT AND PLUMBER’S PUTTY-These two items work best to fix noticeable leaks in your sink pipes. Use the plumbers putty around joints that are leaking. If this doesn’t work, use the wrench to remove the pipes, and after cleaning them, add new sealant and reattach.

It really is easy to be a home plumber! Just a bit of knowledge and the right tools will aid you in becoming a do-it-yourself now!